Z.VEX Effector Vextron Series Distortron

It can be used effectively with a variety of amplifiers, but if you want to hear the sound I want, try it with a martial amplifier without the master volume. By controlling the volume of the guitar itself, you can adjust the amount of distortion. Set the GAIN switch to Lo for clear driving sound, and lower the guitar volume for clean sound. Basically, it is recommended that you connect DistorTRON to the end of the pedal board just before the amplifier. Set the amplifier to your desired clean sound and set the DistorTRON to your preferred distortion sound. If you are using a booster pedal, try to connect DistorTRON to the front and back of that booster. DistorTRON forward gives you more sustain and backward for volume (more drive if you use DistorTRON amplifier) If you are using other Distortion Pedals, try pairing it with that pedal. Many distortion pedals can be used with DistorTRON for great sound. You'll find new discoveries in the Distortion Collection and come out with the pedals you will love! The best way to use this pedal is to use with Marshall JTM45 to make a warm and clean setting (try to adjust the volume below 3 and other knobs 6).

• Eliminate booster from Box Of Rock and add Subs and gain switches
• Subs switch emphasizes low range from position 1 to 3
• Control: VOL, TONE, DRIVE, SUBS, GAIN
• The design, color, etc. may change without prior notice due to changes in design on the manufacturer side
• This product is a Japanese agent product (parallel import goods cannot be covered by the agent warranty)