Eastwood Matte Black Rust Encapsulator Plus | Long Lasting Durable Finish 1 Coat Maximum Rust Protection | Heat Resistance up to 350 degrees Fahrenheit | 5 Gallon

Eastwood Rust Encapsulator Plus is a high performance, moisture-cured urethane coating that encapsulates and stops rust from spreading. Rust Encapsulator Plus does not require a top coat except when exposed to direct sunlight. Rust Encapsulator Plus may be top coated with most high quality coatings. Apply over bare metal surfaces or rusted areas. Rust Encapsulator Plus is ideal for any type of rusted metal surface and can withstand temperatures up to 350 degrees F. Packaged in a large 16 ounce aerosol spray can. NOTE: This product can not be sold in the state of California.

• RUST ENCAPSULATOR: Iron oxide is no match for our original Eastwood Rust Encapsulator. This paint-over-rust solution quickly stops surface rust before it can compromise the part’s structural integrity. Rust Encapsulator penetrates deep into the metal
• HOW TO USE: Apply product as a primer/Encapsulator over clean or corroded (rusted) steel or cast iron. Prep surface by mechanically cleaning loose flaking rust with a stiff brush or wire brush/wheel. Remove any grease, oils, or other surface contaminants
• 2X Stronger Than Original Rust Encapsulator
• SAFETY INFORMATION: Always wear eye, skin and respiratory protection when applying this product. Use in a well ventilated area away from open flame. Store spray in a cool dry place.
• WARRANTY: Comes with a 1-year limited warranty and 90 day return.