Aremco-Bond 614 Electrically and Thermally Conductive Paste, Pint

Aremco-Bond 614 is an advanced, two-part, nickel-filled, low-cost, high temperature, electrically and thermally conductive paste used for electrical and electronic assembly applications to 360°F (182°C). This system exhibits a volume resistivity of less than 0.025 ohm-cm at room temperature. The continuous operating temperature range is 360°F (180°C) and intermittent use temperature is 400°F (205°C). The tensile shear strength is 2,500 psi and Shore D hardness is 78. Mixed Viscosity range is 100,000 to 110,000 cP.Aremco-Bond 614 mixes easily in a 1-to-1 ratio by weight. It sets at room temperature in 24 hours or can be heat cured in 2 hours at 100°F.Typical applications include electrical connectors, LEDs and sensors as a replacement for solder.