1pcs ST18×2.5 Wire Thread Insert ，Helicoil Type Thread Repair Insertinstallation Tool

★ installation instructions 1. Put the installation handle of the steel wire screw sleeve downward and put it into the vertebral hole of the guide seat by hand, then insert the core rod into the steel wire screw sleeve, and the end notch will catch the installation handle. Or put the steel wire screw sleeve on the screw in mandrel first, insert the mounting handle into the notch of the mandrel, then hold the guide seat and screw the steel wire screw sleeve into the guide seat. 2. Continue to rotate the mandrel to make all the steel wire thread sleeves enter the guide seat, and about one circle of thread leaks out at the other end of the guide seat. 3. Place the guide seat on the screw hole to align the steel wire screw sleeve with the screw hole. 4. Press the guide seat with one hand, and continue to rotate the mandrel with the other hand, so that the steel wire thread sleeve is separated and completely rotated into the screw hole. 5. Remove the guide seat and use the mandrel to rotate the steel wire screw sleeve to the specified position. 6. Remove the core rod and check whether the steel wire screw sleeve is installed in good condition.

• Material: alloy steel
• ST18×2.5 Wire Thread Insert Installation tool For M18-2.5×1D (1.5D, 2D, 2.5D, 3D) Wire Thread Insert
• Packing Quantity:1pcs